The Second U.S. Naval Observatory CCD Astrograph Catalog (UCAC2) Table of Contents 1) Introduction 2) Summary of the Project a) Observations and Instrumentation b) Reductions of UCAC Observations c) Computation of Proper Motions 3) Properties of the Catalog and Important Notes For the User a) Sky Coverage b) Completeness c) Positions, Proper Motions and Error Calculations d) UCAC2 Magnitudes e) 2MASS Photometry f) Non-stellar Data g) Provided Utility Software h) Arrangement of the Data Files i) Star Identification Numbers 4) Files Contained on the CDs a) File readme.txt b) Directory "info" c) Directory "sw" d) Directory "u2" 5) Data Formats a) Files z001 to z288 (directory "u2") b) File u2index.da (directory "u2") c) File u2index.txt (directory "info") 6) Description of Utility Software 7) Acknowledgment 8) References ============================================================ 1) Introduction --------------- This is the "readme" file of the Second U.S. Naval Observatory CCD Astrograph Catalog, UCAC2. Each of the 3 CDs contains this readme file as well as an identical copy of the "info" directory (index files and plots) and the "sw" directory (utility software). The UCAC2 is the second release of the ongoing UCAC project, designed to observe the entire sky for R magnitudes of about 7.5 to 16. The observed positional errors are about 20 mas for the stars in the 10 to 14 magnitude range, and about 70 mas at the limiting magnitude of R ~16. For up-to-date information on the project, see our web page at http://ad.usno.navy.mil/ucac/ . This web page will also serve as the location that the UCAC team will post addenda to the UCAC2 catalog. The UCAC2 is a high density, highly accurate, astrometric catalog of 48,330,571 stars covering the sky from -90 to +40 degrees in declination and going up to +52 degrees in some areas. The northern limit is a function of right ascension. Proper motions and photometry are provided for all stars. Positions and proper motions are on the ICRS (International Celestial Reference System) and given at the epoch J2000.0. The UCAC2 has a number of major differences with respect to UCAC1. These differences include: - much larger sky coverage - reduced systematic errors of CCD observations - positions given at a standard epoch (J2000.0) - the addition of several new catalogs for improved proper motions - photometry in the J, H, and K_s bands from the 2MASS project - data in binary format for direct access - inclusion of software to aid users in quick access of the data Additional details of the data are found in Sections 3, 4, and 5 of this document. UCAC2 is the last intermediate data release before the final, all sky catalog will be constructed. Observations will end around mid 2004; the final catalog is expected out in 2005. The UCAC project, observations, and first data release are described in detail in the paper Zacharias et al. AJ 120, 2131 (2000). Versions of that and other related papers are placed on our Web page (http://ad.usno.navy.mil/ucac/). The paper describing UCAC2 is in preparation (AJ, 2003). The data are freely available; however, any publication utilizing these data should make proper reference to the project and papers. 2) Summary of the Project ------------------------- 2a) Observations and Instrumentation ------------------------------------ The UCAC is an observational program, using the U.S. Naval Observatory Twin Astrograph and a 4k by 4k CCD camera, covering just over one square degree per frame with a scale of 0.9"/pixel. The red-corrected, 20 cm aperture, 5-element lens of the astrograph provides a 9 degree (diameter) field of view (designed for photographic plates), thus only a fraction is utilized with our CCD camera, centered on the optical axis. The CCD is a thick, Kodak device with 9 micrometer pixel size. The camera, made by Spectral Instruments, is peltier cooled to -18 C. The raw data are severely affected by a low charge transfer efficiency (CTE) of our otherwise cosmetically excellent CCD chip. To mitigate this problem, a relatively warm operating temperature is used, causing a significant dark current. Observations started in January 1998 at Cerro Tololo Interamerican Observatory (CTIO) in Chile, where the entire southern sky and ~ half of the northern sky were observed. In October 2001 the instrument was moved to the Naval Observatory Flagstaff Station (NOFS) in Arizona to continue the northern sky. Complete coverage from pole to pole is expected by mid 2004. This second data release contains data observed through 08 December 2002 at which time about 86% of the entire sky was completed. A 2-fold, center-in-corner overlap pattern was adopted on a 0.5 degree grid, starting at the South Celestial Pole. Each field was observed with a long (100 to 150 sec) and a short (20 to 30 sec) exposure. Extensive quality control routines led to the rejection of over 15% of the frames taken. All raw (pixel) data are saved. Observations are made in a single bandpass (579-642 nm), thus the UCAC magnitudes are between Johnson V and R. No attempt has been made to obtain high quality, photometric data from the CCD observations. In fact, observing progresses even during nights with thin cirrus clouds. The telescope is actively guided with an ST-4 autoguider mounted behind the second, visually-corrected lens of the twin-astrograph. Operation is automated using a PC and a single board computer. An HP-Unix workstation is used for on-line reductions to obtain quality control statistics in near real-time. 2b) Reductions of UCAC Observations ----------------------------------- Unlike the UCAC1 which utilized Hipparcos and ACT catalog stars, the UCAC2 was processed using Tycho-2 reference stars. This doubled the number of available reference stars per frame, however, positional errors of individual faint stars in Tycho-2 are significantly larger than the x,y errors of UCAC observed images. A special effort went into dark-correcting frames. Frequent darks are taken for all standard exposure times and camera vacuum pressures. Twilight flats have been taken throughout the project, however, they have not been applied for the UCAC2 processing. Observed profiles of stellar images are fitted with a two-dimensional Gaussian model. The obtained x,y centroid positions of the stars are then corrected for various effects, including: - CTE (Charge Transfer Efficiency), this manifests itself as magnitude and coma-like terms for the x coordinate, i.e. RA; - FDP (field distortion pattern), inhomogeneous filter, tilt of the CCD chip w.r.t. the optical axis, optical distortion; - pixel phase error (as a function of the pixel fraction coordinate and the widths of the image profiles). In the actual astrometric "plate" reduction step itself, a minimal model (only linear terms) was used to keep error propagation small. Effects from aberration and refraction were removed prior to a least- squares fit of the x,y data to the reference stars' mean positions at the CCD frames epoch. As with UCAC1, all "problem cases" were excluded from the catalog. In particular, many multiple stars are excluded in UCAC2 as their images are often elongated. Precise centroiding on such objects is difficult with our current software. It was decided to use the same centroiding routines as with UCAC1 and remove these "problem" data. This software is being modified; re-processing of the pixel data is planned for the final catalog release. Saturated images of stars were not used, thus no bright stars are included. Depending on atmospheric conditions, the cut-off at the bright end is around R magnitude 8. Weighted mean positions were produced from the individual positions. Only stars with 2 or more images are included in this catalog. Stars with a formal standard error (derived from the scatter of the individual images of a star) exceeding 200 mas in either coordinate were excluded. Those stars are either very faint, blended images, or have other miscellaneous problems. 2c) Computation of Proper Motions -------------------------------- Proper motions of bright stars (R ~8 to ~12.5) were derived using a combination of ground-based photographic and transit circle catalogs, and included satellite observations from the Hipparcos and Tycho-2 catalogs. In addition, the U.S. Naval Observatory is in the process of re-measuring the AGK2 photographic plates, taken in Bonn and Hamburg (Germany) around 1930. About 600,000 new catalog positions from this re-measurement are included in the area north of +20 degrees declination. For the faint stars (~12.5 to ~16), data from the Lick Northern Proper Motions (NPM, Jones et al. 2000) and the Yale Southern Proper Motions (SPM, van Altena et al. 1999) are utilized. These plates were measured on the Precision Measuring Machine at USNO Flagstaff Station and initially reduced by D. Monet. For his reductions, Monet used only the yellow series, so the data are referred to as the "Yellow Sky" (currently unpublished). The data were subsequently massaged at USNO Washington by S. Urban to minimize systematic errors. The use of the Yellow Sky for the faint stars is a departure from UCAC1, which utilized the USNO A2 catalog. Not surprising, statistics show the Yellow Sky -- observed using astrographs -- is about twice as accurate as the A2 -- observed with Schmidt telescopes. There are 18,604 previously known high proper motion stars in the UCAC position file. These were identified by Gould and Salim utilizing the New Luyten's Two-Tenths Catalog and graciously forwarded to the UCAC team. However, only those high proper motion stars with an early epoch, astrometric position available were included. There were 8282 stars found in our standard catalogs (Yellow Sky, AC 2000.2, Tycho-2, Hipparcos, other transit circle and photographic catalogs), while 7666 stars were supplemented utilizing positions from the USNO A2, thus a total of 15,948 NLTT stars are in the UCAC2. Note that these are the only stars for which the USNO A2 is utilized, as we are trying to minimize the reliance on Schmidt plate data in the UCAC2. The computation of proper motions is performed similarly to the procedure used for the UCAC1 and the Tycho-2 catalogs. All input catalogs were reduced to the ICRF utilizing Hipparcos data or some denser, interim catalog that follows the system of Hipparcos. Standard errors for each position are estimated. These error estimates are used as weights to compute a mean position and proper motion, which utilizes a weighted, least-squares adjustment procedure. Error estimates of UCAC2 astrometry are provided. Errors in proper motions of the bright stars (to R ~12) run from about 1 to 3 mas/yr mainly due to the large epoch spans involved. For the fainter stars using exclusively Yellow Sky data, typical errors are estimated to be 4 to 6 mas/yr. All stars in the UCAC2 have proper motions. Stars are not included if: - they were not observed in the astrograph CCD program; - they were observed, but the UCAC positional reduction failed for some reason; - the epoch span between first catalog position and UCAC does not exceed 10 years; - no proper motion could be computed (no one-to-one match found in other position catalogs). - proper motions exceed 180 mas/yr but stars were not identified in the revised NLTT or Hipparcos Catalogue; - errors in proper motion based on scatter of the individual positions exceed 20 mas/yr. All totaled, 48,330,571 stars of the 58,843,138 stars observed with the astrograph up to December 8, 2002 are included in UCAC2. 3) Properties of the Catalog and Important Notes for the User ------------------------------------------------------------- 3a) Sky Coverage ---------------- Included in UCAC2 are all areas of the sky from the South Celestial Pole to between +40 and +52 degrees declination. The northern limit is a function of right ascension. The plots skycov_u2.ps (black and white) and skycov_u2c.gif (color) in the "info" directory show all survey fields which are included in this release (see Section 4b for further details on these plots). These are all fields taken up to the night of 07/08 December 2002. The plot skycov_nofs.ps and skycov_nofs.pdf show only the northern fields completed at US Naval Observatory Flagstaff Station up to the same date. The data for these plots are much fewer but show the same northern limit of the UCAC2. Their southern limit shows the border line between observing performed at CTIO and NOFS. 3b) Completeness ---------------- The UCAC2 is NOT complete, neither in the above mentioned sky coverage (above +40 degrees), nor for individual magnitude ranges for a variety of reasons: - Stars whose images were saturated on the detector are not included. If a star is brighter than R ~8.0, it is likely not in the UCAC2. - Multiple stars with separations of 3 arcsec or less are excluded by design (unique matching requirement). Most multiple stars in the 3 to 6 arcsec separation range are likely missing due to blended images. - All "problem stars", e.g. with large internal errors in the image combination step, are excluded. - Stars with fewer than 2 observations meeting the UCAC quality standards are excluded. Single detection observations are not used at this time. - Stars where a one-to-one match was not made with the proper motion input catalogs are excluded. Many of these will be in the final UCAC catalog. - If a star's proper motion was computed to be larger than 180 mas/yr in either coordinate, but it is neither a known NLTT star nor found in the Hipparcos Catalogue, it is excluded from the UCAC2. - If a proper motion could not be determined due to lack of early epoch data, either it being non-existent or less than a 10 year span from the UCAC observation, the star is excluded. - If the proper motion error based on the scatter in the positional data exceeded 20 mas/yr in either coordinate, it is excluded. 3c) Positions, Proper Motions, and Errors ----------------------------------------------------- The astrometry provided in the UCAC2 is on the Hipparcos system, i.e. the International Celestial Reference System (ICRS), which is consistent with the (old) J2000.0 equator and equinox. Positions are given at the standard epoch of Julian date 2000.0, thus the UCAC2 is a compiled catalog. In order to be able to calculate positional errors at any epoch, the central epoch, i.e. the weighted mean epoch of the data (UCAC + early epoch) is given. At the central epoch (which varies from star to star and is also different for RA and Dec) the positional error has its smallest value given in the catalog. In most cases this central epoch will be close to the UCAC observational epoch due to the relatively large weight given to the UCAC observations. (The UCAC2 observational epochs are in the range of 1998.1 to 2002.9.) The proper motions are given at the central epoch. 3d) UCAC2 Magnitudes -------------------- The UCAC2 magnitude range is about 8 to 16 in a 579-642 nm bandpass. This is between visual (V) and red (R). The limiting magnitude can vary by about +-0.3 mag. The bright magnitude cut-off varies even more, depending on seeing conditions at the time of observation. UCAC magnitudes are only approximate with an estimated error of about 0.3 mag (absolute). The relative precision over < 0.5 degree and medium magnitude range can be much better, ~0.1 mag. Note: some data were obtained in non-photometric conditions and no "aperture photometry" type reductions were made. The UCAC2 magnitudes are only provided for identification purposes. 3e) 2MASS Photometry -------------------- The procedures to derive the UCAC2 observed photometry is unchanged from the UCAC1 procedures, giving only very approximate R magnitudes (see Section 3d). However, for the UCAC2 release, the data from the Two Micron All Sky Survey, 2MASS, has kindly been made available to us by R. Stiening, shortly before the public release. 2MASS photometric data, i.e. the J, H, and K_s magnitudes, and cross references (star ID numbers in the 2MASS point source catalog) are provided for matched stars as a convenience to the user. These numbers are copied directly from 2MASS; for more information (flags, errors on photometry etc.) the 2MASS catalog should be consulted: http://www.ipac.caltech.edu/2mass/releases/allsky/ . In addition to J, H, and K_s magnitudes a modified "ph_qual" and "cc" (contamination) flag has been copied into UCAC2. A match radius of 2 arcsecs has been used between the UCAC and 2MASS positions (no proper motions were available at that time), which still could lead to a few wrong identifications for binaries on that separation scale. In total, 48,079,174 stars have 2MASS photometry listed, which is 99.5% of the UCAC2 stars. 3f) Non-stellar Data -------------------- The UCAC2 contains some galaxies, particularly at the faint end. No flag indicating a galaxy or star is provided with this release; however, extended objects are very unlikely to be in the UCAC2 due to the detection and reduction quality control procedures adopted for the catalog construction. Also, galaxies of integrated magnitudes of ~15 or fainter are likely to show cores fainter than 16th magnitude thus will likely not be in the UCAC2. Some asteroids might be hidden in the UCAC2. The observing schedule actively avoided all major planets and bright asteroids (to 12th mag). However, asteroids in the ~12 to 14 mag range can appear on both the long and short exposure taken within 2 minutes and could give a satisfactory position match. Fainter asteroids could enter the UCAC2 only if overlapping fields with the object were taken within a short period of time, which might be the case for about 30% of the fields. Many overlapping fields are taken the following night, with a possible asteroid having moved far enough that it will not be matched on at least 2 frames, hence it will not be present in the catalog (2 detections of an object are required to be in UCAC2). Additionally, with the requirement that each object have a proper motion using an older catalog, it is unlikely that many asteroids are present in the UCAC2. 3g) Provided Utility Software ----------------------------- Some utility software is included with the CD-ROMs. It is not required to use the data; however, this software serves as an example for a fast access to the data. No guarantee or support is provided. See Section 6 below for more details. 3h) Arrangement of the Data Files --------------------------------- The data are arranged in declination zones of 0.5 degree width, with zone number 1 starting at the South Pole and increasing as one goes north. There is a separate file for each zone; there are 288 data files in total. Due to the amount of data, 3 CDs were required, each with about 680 MB of mostly binary data. Records in the individual data files are sorted by right ascension. One record contains the data for one star. 3i) Star Identification Numbers ------------------------------- Official UCAC2 star ID numbers should be utilized for identification purposes and for communication with the UCAC team. However, these numbers are not explicitly stored in the binary files but are generated when extracting data using the provided utility software. These star numbers increase along RA within a given declination zone of 0.5 degree width, and increase with declination zone starting from the South Pole. If the provided utility software is not used the UCAC2 star ID number can be generated from the provided index files using the following method: ID = n0 + running star number in zone z where z is zone number where the star in question is located (1 to 288; zone 1: -90 to -89.5 decl., ...), n0 is the largest star ID number of the previous zone and ID is this official UCAC2 star ID number. To get the value of n0, one needs "nx", the index array provided in the file u2index.da (also available in the ASCII text file, u2index.txt). The nx array is a 2-index array containing the largest ID number in each area of the sky. The first index is the zone number as described above; the second is the right ascension bin of 0.1 hours width. Hence, nx has (288x240) elements. For z=1, n0 = 0. For any other value of z, n0 = nx (z-1,240). If needed, this 8-digit star ID number should be given in connection with the IAU sanctioned acronym of this project and this data release number, like "2UCAC12345678". The star ID number runs from 00000001 to 48330571. Leading zeros are to be used to fill 8 digits in the star name. Also, the position of a star can be used as an identifier. 4) Files contained on the CDs ----------------------------- All 3 CDs contain the same directory structure. There is a "readme.txt" file (this file), and 3 directories; "info", "sw", and "u2". The "readme.txt" file, the "info" directory, and "sw" directory are identical on all CDs. However, the contents of the data directory "u2" are different. Here is a list of all files: 4a) File "readme.txt" ---------------------- readme.txt = This file, it is the only file outside a subdirectory. This contains general information on the catalog, the observing program from which the catalog is made, information about the CDs, data formats, and references. 4b) Directory "info" --------------- This directory contains information which may be beneficial to the user. format.txt = Format description of the main data records. This is a copy of Section 5 of "readme.txt" (this file). Due to its anticipated frequent reference, it was copied into a separate file for ease of the user. rdp_pole.ps = Color plot of UCAC2 star distribution in RA,Dec near the South Pole (generated with u2rdplot.f). rdp_smc.ps = Color plot of UCAC2 star distribution in RA,Dec for the Small Magellanic Cloud area. Note the large number of faint stars (blue) and the absence of data in the core of the globular cluster due to crowding. skycov_u2.ps = Black and white, high resolution, PostScript file of a plot showing the sky coverage of the UCAC2 data. Areas not covered by dots are not included in this release. skycov_u2c.gif = similar to skycov_u2.ps, however in color and as GIF file. Colors represent approximately one calendar year of observing starting from the beginning of the project. However, we decided to graphically show when we moved the telescope from CTIO to NOFS. The colors represent frames taken over the following periods: Yellow = mid-February 1998 to mid-February 1999; Blue = mid-February 1999 to mid-February 2000; Red = mid-February 2000 to mid-February 2001; Green = mid-February 2001 to September 2001 at which time the telescope was disassembled for re-location to NOFS; Pink = Start up at NOFS October 2001 to October 2002; Light blue = October 2002 to December 8, 2002 (latest frames used in this release). skycov_nofs.ps = Similar to skycov_u2.ps. Shows fields covered from the U.S. Naval Observatory Flagstaff Station site, i.e. the northern part of the survey. The northern limit shows the boundary of this UCAC2 release, the southern limit shows the border between observations made at Cerro Tololo and Flagstaff. skycov_nofs.pdf = same as skycov_u2.ps, but in PDF format. zone.txt = Table of contents for the main data giving a list of zones. Each line of the table gives; the number of stars, accumulated number of stars, right ascension minimum and maximum values, and declination minimum and maximum values per zone. Note a zone is 0.5 degrees wide. u2index.txt = ASCII table of the full index, organized in declination zones and sections of 0.1 hour width along RA. Again, the number of stars per bin and the accumulated number of stars are given. This information can be used to locate the desired section (record number) on a zone file for a given area in the sky. See Section 5c for further description of the data. u2chk.log = Output of the u2chk program, containing statistics, and histogram tables of all items. The range of values for each item is given as well as the distribution of the central epochs and errors. u2tab1.txt = An ASCII table formatted sample of a selection of 14 stars. This was generated with u2access and covers stars in the 5 to 14 mag range for RA = 23.9 to 0.1 hours, DE = -82.1 to -81.9 degrees. Format 1 is used, i.e. all items from the binary file are output as integers. The UCAC2 star identification number is appended as well. u2tab2.txt = The same as u2tab1.txt, except using format = 2, which gives positions updated for the epoch = 2003.0, RA, DE in degrees and decimals, along with proper motion information and errors (decimals). u2tab3.txt = The same as u2tab1.txt, except using format = 3, which gives RA, DE in hms and dms format, respectively. Flags and 2MASS photometry are included in this format (decimals). u2tab4.txt = The same as u2tab1.txt, except using format = 4, which gives a short table with only RA (hour, decimal), DE (degree, decimal), U2Rmag, error on position and star ID number. 4c) Directory "sw" (utility software, Fortran only) ------------- The utility software (Fortran source code) is not required to use the UCAC2 data. The software serves as an example of efficient use of the data with fast, random access to arbitrary areas in the sky. It is provided for the convenience of the user only. No support is provided by USNO. Additional UCAC2 access software in C/C++ has been kindly provided by Bill Gray (GUIDE Software) and can be found on the web at http://www.projectpluto.com/ucac2 Executable files of the 2 main access programs are provided for Linux (Intel Pentium processor), Windows (DOS), and HP-UNIX. For future additions, please see our web page http://ad.usno.navy.mil/ucac/ . See Section 6 for a complete list and short description of the programs. 4d) Directory "u2" (main catalog data) ------------- u2index.da = binary file with an index to all zones = "nx" array, see Sections 3i and 5b. This file is used by some of the utility software and is expected in the same directory as the data files. There is an identical copy on each of the 3 CDs. This information can also be obtained from the u2index.txt file provided in the "info" directory. The u2index.da file is used for faster access with the utility programs. Both index files, the ASCII and the binary version, can be re-created by the user by running the u2chk program (see Section 6). Files z??? = Binary data files containing the UCAC2 catalog. See Section 5a for details on the data formats. Note that each file contains data for a 0.5 degree wide zone, beginning at the South Celestial Pole. The CDs contain zones from different declinations. z001 to z106 = -90.0 to -37.0 declination on CD #1 z107 to z182 = -37.0 to +01.0 declination on CD #2 z183 to z288 = +01.0 to +54.0 declination on CD #3 In addition, z001 is copied on CD #2 and CD #3. It is used for a byte-flip check in the utility programs. A recommended option is to copy the u2index.da and all data files from the 3 CDs into a single directory on hard disk in order to avoid the need of switching CDs. The utility programs should work in either case. If a needed data file is not present, a warning will be issued from the program. The user may then change the CD and continue. A single path name for all binary data files is assumed. 5) Data Formats --------------- 5a) Files z001 to z288 ("u2" directory) ---------------------- These files constitute the main data of the catalog. All items are (signed) integer. "I*1" means the data for these items are contained in 1 byte, "I*2" means 2 bytes, etc. The order of bytes is for an Intel processor. Each record contains the data for one star, totaling 23 items. The record length is 44 bytes, with no additional "end of line" or unformatted leading or trailing bytes. In Fortran this is known as a direct access, fixed record length, unformatted file. (Note, some compilers specify the record length as multiple of 4-byte segments, thus RECL=11 is required in that case,instead of RECL=44 which applies to other compilers. RECL=44 is used in the utility software provided on these CDs.) The following items are on each star record: Num Bytes Fmt Unit Label Explanation ----------------------------------------------------------------------------- 1 1- 4 I*4 mas RA Right Ascension at epoch J2000.0 (ICRS) (2) 2 5- 8 I*4 mas DE Declination at epoch J2000.0 (ICRS) (2) 3 9-10 I*2 0.01 mag U2Rmag Internal UCAC magnitude (red bandpass) (3) 4 11 I*1 mas e_RAm s.e. at central epoch in RA (*cos DEm)(1,4) 5 12 I*1 mas e_DEm s.e. at central epoch in Dec (1,4) 6 13 I*1 nobs Number of UCAC observations of this star(5) 7 14 I*1 e_pos Error of original UCAC observ. (mas) (1,6) 8 15 I*1 ncat # of catalog positions used for pmRA, pmDC 9 16 I*1 cflg ID of major catalogs used in pmRA, pmDE (7) 10 17-18 I*2 0.001 yr EpRAm Central epoch for mean RA, minus 1975 (8) 11 19-20 I*2 0.001 yr EpDEm Central epoch for mean DE, minus 1975 (8) 12 21-24 I*4 0.1 mas/yr pmRA Proper motion in RA (no cos DE) (9) 13 25-28 I*4 0.1 mas/yr pmDE Proper motion in DE (9) 14 29 I*1 0.1 mas/yr e_pmRA s.e. of pmRA (*cos DEm) (1) 15 30 I*1 0.1 mas/yr e_pmDE s.e. of pmDE (1) 16 31 I*1 0.05 q_pmRA Goodness of fit for pmRA (1,11) 17 32 I*1 0.05 q_pmDE Goodness of fit for pmDE (1,11) 18 33-36 I*4 2m_id 2MASS pts_key star identifier (12) 19 37-38 I*2 0.001 mag 2m_J 2MASS J magnitude (13) 20 39-40 I*2 0.001 mag 2m_H 2MASS H magnitude (13) 21 41-42 I*2 0.001 mag 2m_Ks 2MASS K_s magnitude (13) 22 43 I*1 2m_ph 2MASS modified ph_qual flag (1,14) 23 44 I*1 2m_cc 2MASS modified cc_flg (1,15) ----------------------------------------------------------------------------- Example: As an example, the data of the first 5 stars from z001 are printed here in ASCII. These are the numbers obtained when using the u2dumpz.f program. item 1 2 3 4 5 6 7 8 9 10 11 12 1246420 -322767602 1591 75 87 2 97 2 1 17330 15213 31020 4125230 -323707012 1382 15 28 8 21 2 1 23246 22659 134316 7345118 -322447512 1579 24 26 4 25 2 1 22903 22799 45845 8139385 -322284308 1479 53 25 5 41 2 1 20455 22911 18125 11128880 -323115466 1631 15 43 2 27 2 1 23364 21562 39404 item 13 14 15 16 17 18 19 20 21 22 23 -35 70 74 20 20 1229086517 14428 13865 13751 000 000 -187 61 62 20 20 1101364107 12467 12131 11963 000 000 104 61 62 20 20 1329022468 14169 13752 13708 220 000 -16 65 61 20 20 1085341332 13111 12511 12339 000 000 -74 61 63 20 20 1085341834 14515 13918 13877 000 000 Note (1): In order to fit within the range of a 1 byte (signed) integer (-127 to +127), some items have an offset value of -127 applied. These are items #4,5 (e_RAm, e_DEm), #7 (e_pos), #14-17 (e_pmRA, e_pmDE, q_pmRA, q_pmDE), and #22,23 (2m_ph, 2m_cc). When using the provided software, the data items are converted to I*4 and automatically corrected for this offset on the required items. Note (2): Positions are on the International Celestial Reference System (ICRS) as represented by the Hipparcos / Tycho-2 catalogs. The epoch for the positions of all stars is J2000.0; the weighted mean catalog position was updated using the provided proper motions. The observational UCAC position is but one of several going into these values and is not given in the UCAC2, thus the original UCAC observation cannot be recovered from these data. Note (3): Values for U2Rmag should be considered approximate. These are magnitudes in the UCAC bandpass (579-642 nm), which is between V and R. Observations were often made under non-photometric conditions and U2Rmag is provided here for identification purposes only. Estimated errors are 0.3 magnitude absolute, 0.1 magnitude relative. Note (4): Values for e_RAm and e_DEm are internal standard errors in position at the central epoch, NOT at the epoch J2000 (see Note 8 below). Note (5): nobs is the number of observations (images per star) used for the mean observational position (not provided) of the UCAC observing. Note (6): e_pos is the internal, formal, 1-sigma error in position of the UCAC astrograph observations, (mas). The mean of the error in RA*cos(DE) and DE is given. This error is derived from the scatter of individual positions which form the mean observed position from the CCD observations of each star. These values are subject to small number statistics; many of the stars have only 2 to 4 observations. On average, for stars in the 7.5 to 10 mag range, 30 mas is expected, for 10 to 14.5 about 15 to 20 mas and increasing up to 70 mas toward 16th magnitude. Note (7): cflg is an identifier of some major catalogs used in the computation of proper motions and also provides the user with information regarding known, high proper motion stars. However, this does not contain all catalogs going into the proper motions, about 150 were used in this project. The cflg value is actually a sum of numbers, each with the following meaning: 1 = modified Yellow Sky (NOFS scans of NPM, SPM; not published) 2 = AC2000.2 Catalog 4 = Tycho-2 Catalogue observed position 8 = USNO measurement of AGK2 plates (not published) 16 = Hipparcos Catalogue 32 = Known high proper motion star from the revised New Luyten's Two-Tenths catalog (NLTT), (match w/ UCAC provided by A.Gould). 64 = USNO A2 Catalog For example, a cflg value of 26 means 16+8+2, hence at least Hipparcos, USNO AGK2 measures, and the AC2000.2 catalogs were used in determining the proper motion. Note (8): EpRAm and EpDEm are the central epochs of the weighted mean position from all catalogs going into the proper motion. This is neither the mean UCAC observational epoch, nor "J2000.0". It is the epoch with the lowest positional errors (e_RAm, e_DEm). For all other epochs (including "J2000.0" which corresponds to the RA, DE positions given here), the error in position can be computed as: e_RA (epoch T) = SQRT ( e_RAm**2 + (e_pmRA * (T-EpRAm))**2) for the RA component, and similarly (using e_DEm, e_pmDE, and EpDEm) for declination. Thus for all epochs other than EpRAm or EpDEm the positional errors for RA and Dec, respectively, increase for both going forward or back in time. Values for EpRAm and EpDEm are usually not equal due to different weights assigned to coordinates in the individual catalogs used in determining the mean positions and proper motions. Note (9): pmRA and pmDE are the proper motion in right ascension and declination, respectively, referred to the central epoch. Note that pmRA is without cos(Dec), thus these values can be large for stars close to the pole. This is done so the units for pmRA and RA are similar, thus facilitating easy computation to change epochs. Both pmRA and pmDE can directly be used to update a star's position for proper motion by: RA (epoch T) = RA + pmRA * (T - 2000.0)/10.0 DE (epoch T) = DE + pmDE * (T - 2000.0)/10.0 Note, values for RA, and DE provided here are in mas, while the pmRA and pmDE provided here are in units of 0.1 mas/yr. Also note that the above formulas do not account for so-called "second-order" effects, such as the change in the apparent direction of the pole as seen from a star as proper motion is applied or the apparent acceleration of a proper motion due to the distance to a star changing. The first effect is negligible in most instances unless a star has a very high proper motion and is very close to the pole and that proper motion is being applied for many years. The second affect is negligible in most cases unless a star is nearby and has a large radial velocity (often this is unknown). Note (10): e_pmRA and e_pmDE are the standard errors of pmRA, pmDE respectively. Note e_pmRA does include cos(DE), which makes both e_pmRA and e_pmDE comparable in the tangential plane. The model value is given here, thus it is a formal error based on the estimated precisions of the individual catalog positions used, as well as their epochs. In addition to these "model" errors, "scatter" errors have been calculated for each star having 3 or more catalog positions used in the proper motion determination. This "scatter" error depends on how well the individual catalog positions fit the computed proper motion. The "scatter" errors in position and proper motion component for each star are not explicitly given here, however the scatter error proper motion values can be recovered using the values q_pmRA and q_pmDE. See Note (11). Note (11): q_pmRA and q_pmDE are termed "goodness of fit" for the pmRA and pmDE. These value give information on how well the computed proper motions actually fit the catalog positions used to compute them, termed "scatter error". The values q_pmRA and q_pmDE are actually ratios, "scatter error pm"/e_pmRA (or e_pmDC). Thus, when the actual fit of the proper motion to the catalog positions is better than the formal, model errors (e_pmRA, e_pmDE), the ratio is smaller than 1. In the opposite case, the ratio is larger than 1. Stars with q_pmRA or q_pmDE values exceeding 5 should be used with caution. If the ratio is larger than 12.5 it is set to 12.5. The ratio of "scatter error" to "model error" of the mean positions is highly correlated to those of the proper motions. Note that the "scatter error" only makes sense for stars with 3 or more catalog positions; if only 2 catalogs were used for the determination of the proper motion, the "fit" is perfect (going directly through each of the 2 positions, regardless of weights). In these cases, the ratios are set to 1.0. The actual integer numbers coded in the data file for q_pmRA and q_pmDE are multiplied by 20 and then have 127 subtracted from them (see Note (1)). Thus, for example, a q_pmRA value of +13 means the value is (13+127)/20, equaling a ratio of 7.0, a value of -107 is (-107+127)/20, equaling 1.0. Note (12): 2m_id is the "pts_key" star identification number found in the 2MASS point source catalog. It is a 4-byte integer number greater than 0. If no unique match to the 2MASS point source catalog was found, 2m_id is set to 0. This is the case for a total of 251,397 stars (= 0.5%). Note (13) 2m_J, 2m_H, 2m_Ks are the J, H, and K_s magnitudes taken directly from the 2MASS catalog with full precision. No error estimates are given in UCAC2, but they can be extracted from the 2MASS catalog. For stars not matched, all three magnitudes are set to 30.0 (a value of 30000 on the UCAC2 record). Note (14): 2m_ph is a modified 2MASS "ph_qual" flag, which is the photometric quality flag given in the 2MASS catalog. For each color (J, H, K_s) one digit is given and has the following meaning: 0 = ph_qual in 2MASS is A or B, meaning good detections (snr > 7) 1 = ph_qual in 2MASS is C or D, meaning weak detections 2 = ph_qual in 2MASS is something else and the 2MASS documentation should be consulted. Note that the values in 2m_ph also have 127 subtracted from them (see Note (1)). For example 2m_ph =-115 is decoded to (-115+127) = 012, meaning good detection in J, weak in H, and a problem in K. Note (15): 2m_cc is a modified 2MASS "cc_flg", which indicates the amount of contamination and confusion seen in the 2MASS data. Similar to 2m_ph (see Note (14)), each color (J, H, K_s) is assigned one digit which has the following meaning: 0 = cc_flg in 2MASS is 0, no artifacts or contamination seen 1 = cc_flg in 2MASS is "c", confusion with nearby brighter source 2 = cc_flg in 2MASS is something else and the 2MASS documentation should be consulted. Note that the values in 2m_cc also have 127 subtracted from them (see Note (1)). For example 2m_cc = 83 is decoded to (83+127) = 210, meaning a problem in J, contamination in H, and no contamination seen in K. 5b) File u2index.da ("u2" directory) ------------------- This binary file contains a the "nx" array. This file is used by some of the utility software and is expected in the same directory as the data files. There is an identical copy on each of the 3 CDs. nx (288,240) = on 288 direct access records; each record of 240 x 4 bytes (RECL=960); total = 276,480 bytes nx (z,jj) = accumulated number of stars for zone z and RA bin jj This information can also be obtained from the u2index.txt file provided in the "info" directory. The u2index.da file is used for faster access with the utility programs. Both index files, the ASCII and the binary version, can be re-created by the user by running the u2chk program (see Section 6). 5c) File u2index.txt ("info" directory) -------------------- This ASCII data file contains information regarding the number of stars in each area of sky. These areas are arranged in declination zones (each zone is 0.5 degrees wide, numbering starts at the South Celestial Pole) further divided by 0.1 hour bins in RA. For this release, the data only go to +54 degree declination, so there are only 288 declination zones, each of which are divided into 240 RA bins. Total areas are 288 * 240 = 69120. The first few lines in the u2index.txt file give a short explanation followed by the main table records like: nsbin naz nat zn jj DCmax RAmax -------------------------------------------- 2 2 2 1 1 -89.5 0.1 2 4 4 1 2 -89.5 0.2 4 8 8 1 3 -89.5 0.3 2 10 10 1 4 -89.5 0.4 1 11 11 1 5 -89.5 0.5 The following format is used for the main table records: Num Bytes Fmt Units Label Explanation 1 1- 6 I6 nsbin number of stars in that bin (zn,jj) 2 7-14 I6 naz number of stars accumulated within zone zn 3 15-23 I9 nat number of stars accumulated total 4 24-27 I4 zn zone number (see file zone.txt) 5 28-31 I4 jj Right ascension index (0.1 hour wide boxes) 6 32-37 F6.1 deg DCmax largest Declination in bin (zn,jj) 7 38-42 F5.1 hour RAmax largest right ascension in bin (zn,jj) 6) Description of utility software ---------------------------------- The source code (Fortran, F77 + extensions) of all programs can be found in the "sw" directory on each CD. More explanations are also provided as comments in the source code files. For some compilers, you need to substitute the declaration BYTE by INTEGER*1. If writing your own software, you might want to take advantage of the low-level access routines open_zfile, read_u2line, and cat_id, in the u2sub.f file. u2sub.f : contains various subroutines used in the following utility programs, could be used for basic level access in user software. Notes contained in that file explain the individual subroutines and their functions. u2chk.f : - read all zone files (option: subset of files) - check if byte flip is required - get statistics and histograms of data items per star - output summary to ASCII file - option: generate index files (ASCII -- u2index.txt -- and unformatted -- u2index.da -- were generated this way). u2dumpz.f : - read all data of a single zone - dump integer values to ASCII file - option available for user selected, limiting magnitude This is a short, simple program and serves as an example of how to use the basic level routines. u2access.f: - interactive access to UCAC2 data by area in the sky - select box in RA, Dec or center + width of box - select mag range - sort output by any of the 23 items - update of positions and errors to desired epoch - output stars in ASCII, various formats - user may define additional output formats u2rdplot.f - plot of individual UCAC2 stars (areas) on RA,Dec grid - option for 2 projections (pole, box) - select stars by RA,Dec range and magnitude interval - 3 groups by magnitude for 3 different colors - requires PGPLOT subroutines (see http://astro.caltech.edu/~tjp/pgplot) sorti.f: - general subroutine to sort a 2-index integer array u2access, u2dumpz - executable files for Linux PC (Pentium processor) u2access.exe, u2dumpz.exe - executable files for Windows (DOS) u2access.HP, u2dumpz.HP - executable files for HP-UNIX No guarantee can be made for this software, nor can any kind of support be provided. Users are encouraged to take segments of these examples and build their own software. 7) Acknowledgment ----------------- In a project such as this that has spanned several years and two continents, many people have been involved. Here we list people and their main contributions to the project. Ted Rafferty - Project leader, instrumentation specialist, observer. Norbert Zacharias - Principle Investigator, observer, responsible for UCAC position reductions (from pixels to positions on the sky), observing schedule, and external position comparisons. Sean Urban - Proper motions Principle Investigator, preparation of other position catalogs including systematic error removal. Marion Zacharias - Quality control, observer, position reductions. Gary Wycoff - Proper motions data preparation, star identifications. David Hall - Verification of tape archive, data handling. Marvin Germain - Telescope control system software development, software-to-hardware interface including electronics. Ellis Holdenried - Telescope control system software maintenance and extension of user interface for telescope operation. Lars Winter - Basis for astrometric CCD reduction software. Danilo Castillo - Observer, Cerro Tololo, Chile Mauricio Martinez - Observer, Cerro Tololo, Chile Sergio Pizarro - Observer, Cerro Tololo, Chile Oscar Saa - Telescope manager, Cerro Tololo, Chile Trudy Tilleman - Observer, U.S. Naval Observatory Flagstaff Station Stephanie Potter - Observer, U.S. Naval Observatory Flagstaff Station Dominic Marcello - Observer, NOFS, joined the project in Jan. 2003 John Pohlman - Telescope upgrades, maintenance, and troubleshooting Gary Wieder - Telescope upgrades, relocation, maintenance, and troubleshooting John Bowles - Telescope upgrades and maintenance (USNO-DC) Dave Smith - Telescope upgrades and maintenance (USNO-DC) Tie Siemers - Telescope upgrades and maintenance (USNO-DC) Mike Divittorio - Telescope maintenance and troubleshooting (NOFS) Steve Sell - Telescope maintenance and troubleshooting (NOFS) Albert Rhodes - Telescope maintenance and troubleshooting (NOFS) Blaize Canzian - Network and computer system support (NOFS) Greg Hennessy - Computer hardware support (USNO-DC) Other Acknowledgments --------------------- Special acknowledgment is due to Dave Monet for his measurements and initial reductions of the Lick Northern Proper Motions and Yale Southern Proper Motion plates, heavily utilized for the proper motion work of the fainter UCAC stars. Both Lick and Yale are thanked for their contribution to this project by providing access to their plates. Samir Salim and Andy Gould provided identifications and initial proper motions for the UCAC stars found in the New Luyten's Two Tenth Catalog. Without these, many of the high proper motion stars would be missing from the UCAC2. This project would not have been possible without support from the USNO administration. Special thanks is given to Thomas Corbin for under- standing the need for such a project, articulating it to those with resources, and administering the project in its early days. Thanks is given to the three Heads of the USNO Astrometry Department during the UCAC project. Without their continued support, it would not have come to fruition. They are F. Stephen Gauss, Ted Rafferty, and Ralph Gaume. Thanks is given to the USNO Scientific Director, Kenneth Johnston, for his approval and support of the project and for making USNO resources available. Our successful stay at the Cerro Tololo observatory would not have been possible without a memorandum of understanding, worked out by P. Kenneth Seidelmann, USNO, and the director of CTIO, Malcolm Smith. The entire staff of CTIO is thanked for their generous support. Also, we wish to thank Gary Sims from Spectral Instruments for building our 4k camera and providing outstanding support over the years. Finally, we wish to acknowledge the following for their important contributions; Bill Gray for custom updates to his GUIDE software regarding minor planet ephemerides, and Rae Stiening (Univ.of Mass.) for providing preliminary and pre-release 2MASS data to our project, thus expediting the UCAC2 release. 8) References ------------- ESA 1997, "The Hipparcos and Tycho Catalogues", European Space Agency, publication SP-1200 Gauss,F.S. Zacharias,N. Rafferty,T.J. Germain,M.E. Holdenried,E.R. Pohlman,J.W. and Zacharias,M.I., 1996, "A new astrometric survey of the Southern Hemisphere", Bull.AAS 28, No.4, p.1282 Hoeg,E., Fabricius,C., Makarov,V.V., Urban,S., Corbin,T., Wycoff,G., Bastian,U., 2000, "The Tycho-2 Catalogue of the 2.5 million brightest stars", Astron.& Astroph. 355L, 27 (short paper) Hoeg,E., Fabricius,C., Makarov,V.V., Bastian,U., Schwekendieck,P., Wicenec,A., Urban,S., Corbin,T., Wycoff,G., 2000, "Construction and verification of the Tycho-2 Catalogue", Astron.& Astroph. 357, 367 (long paper) Jones, B. F., Hanson, R. B., and Klemola, A. R., 2000, "Lick Northern Proper Motion Program: NPM2", AAS meeting 196 abstract 53.02 Urban, S.E., Wycoff, G.L., Makarov, V.V., 2000, "Comparisons of Tycho-2 Catalogue Proper Motions with Hipparcos and ACT", AJ 120, 501 Urban, S.E., Corbin, T.E., Wycoff, G.L., Makarov, V.V., Hoeg, E., Fabricius, C., 2000, "The AC 2000.2 Catalogue", AAS meeting 199, abstract #129.04 van Altena, W. F., Girard, T. M., Platais, I., Kozhurina-Platais, V., Ostheimer, J., Lopez, C. E., and Mendez, R. A., 1999, "The Yale/San Juan Southern Proper Motion Program", AAS DDA meeting #31, #10.04 Winter, L. 1999 Ph.D thesis, University of Hamburg (in German) Zacharias, N. 1997, "Astrometric Quality of the USNO CCD Astrograph (UCA)", AJ 113, 1925 Zacharias, N., Germain, M.E., Rafferty, T.J., 1997, "UCAC-S: a New High Precision, High Density Astrometric Catalog in the Southern Hemisphere", in: Proceedings "Hipparcos Venice 97", ESA publication SP-402, p.177 Zacharias, N. Zacharias, M.I., 1999, "Data Structure and Software of the UCAC-S Project", in: Proceedings of ADASS VIII, Eds. D.M.Mehringer, R.L.Plante and D.A.Roberts, ASP Conf.series 172, p.345, San Francisco Zacharias, N., Urban, S.E., Zacharias, M.I., Hall, D.M., Wycoff, G.L., Rafferty, T.J., Germain, M.E., Holdenried, E.R., Pohlman, J., Gauss, F.S., Monet, D., Winter, L., 2000, "The first US Naval Observatory CCD Astrograph Catalog", AJ 120, 2131 Zacharias, N., Zacharias, M.I., Urban, S.E. and Hoeg, E., 2000, "Comparing Tycho-2 astrometry with UCAC1", AJ 120, 1148 Zacharias, N., 2002 "Astrometric surveys in support of large telescopes", Proceed. SPIE 4836, 279, Eds. T.A. Tyson & S. Wolff Zacharias, N. 2003, "The USNO CCD Astrograph Catalog (UCAC) Project and Beyond", in "Small Telescopes in the New Millennium II. The Telescopes We Use.", ed. T Oswald, Kluwer Acad. Publ Zacharias, N., Urban, S., Rafferty, T., Holdenried, E., and Winter, L., 2003, "First Results from AGK2 Plate Remeasurements", AAS DDA meeting, in press. Zacharias, N., Urban, S.E. et al. "The second US Naval Observatory CCD Astrograph Catalog", in preparation for AJ ------------------------------------------------------------- Norbert Zacharias & Sean Urban for the UCAC team, USNO, Washington DC